How to build a computer (part 4 of 9)

April 3rd, 2009

This is how you build a computer. Since my previous computer died (the motherboard or processor died causing POST to not occur (the beep you hear upon starting your computer)), I had to replace it and upon getting my replacement parts, I figured I’d record videos on how to put together a computer. This video leaves out the part about buying components and compatibility checking out - it, instead, focuses toward installing the components, pretty much from scratch. The video uses 28 segments …

Posted in Category Data Recovery

9 Responses to “How to build a computer (part 4 of 9)”

  1. ulillillia on April 3rd, 2009 3:46 pm

    I still actively touched the case. Before I worked with my computer, I touched both the power supply (while it was still plugged in, though the switch in the back was at the 0 position), and the case. While working with the components, I was actively touching the case. I was told that the power supply was just as effective, but I wasn’t told about its state (plugged in or not) having an effect. Keep in mind that I’m not an expert. I’m about a 3 to 3.5 on a 1 to 5 scale with 5 as master.

  2. dcramps on April 3rd, 2009 3:46 pm

    Just touching a piece of metal isn’t going to do anything. Your PSU is just sitting on the floor. It isn’t grounded to anything. It is very simple physics.

    Best thing to do is have your PSU in the case and plugged in (obviously don’t plug things in to the PSU yet) while you’re working, and touch it to keep yourself grounded.

    Just touching the case as you’re working with it helps too - that way at least you have a common ground while you work with it. (not the same as touching the PSU!!)

  3. ulillillia on April 3rd, 2009 3:46 pm

    I knew that, however, you’re basically stating that touching the power supply is not as good as clipping the antistatic strap to some metal. Either that, or I’m confused. I’m no expert in this, I just have the know-how on how to do it.

  4. wiretransfer on April 3rd, 2009 3:46 pm

    I think the straps are supposed to be connected to a piece of metal that is grounded. The would indeed be worthless just floating in air

  5. ulillillia on April 3rd, 2009 3:46 pm

    If that accomplishes nothing, then what use would one of those antistatic straps have (I don’t have one of those)? Just touch any metallic object to discharge static and you should be fine.

  6. dcramps on April 3rd, 2009 3:46 pm

    Grounding yourself to a PSU that isn’t attached to anything accomplishes nothing.

  7. HelmerandRawlins on April 3rd, 2009 3:46 pm

    Making a new rig is fun stuff. Congratulations and enjoy!

  8. BanjoD453 on April 3rd, 2009 3:46 pm

    Factory sealed!

  9. bgudna on April 3rd, 2009 3:46 pm

    great stuff! love it!

Feel free to leave a comment...
and oh, if you want a pic to show with your comment, go get a gravatar!